ELF@44P4 (44@4@@@p@@@@,,0x  @ @/lib/ld-uClibc.so.0m 8@ `!@@h@X@  pppp@ pp1pp%1" !' +   0 ,*#$/(&%.-) wR @@c x@xx @3 I @ @ @ @ @l @0@`!@ #@ @ @ @ D@ @]x @*8@@l@p @D\@` @}P @@@ @f0 @ @< @_fini__uClibc_start_main__deregister_frame_info__register_frame_info_Jv_RegisterClassesppdev_fdioctl__errno_locationstrerrorstderrfprintfcloseparport_cleanupexitreallocstrlenxmallocstrcpyprint_versionxopenparport_readgetopt_longoptargstrtolxstrdupstdoutprint_helpparport_initparport_print_stateparport_write_DYNAMIC_LINKING__RLD_MAPlibc.so.0_gp_disp_DYNAMIC_GLOBAL_OFFSET_TABLE__ftext_fdata_gp_edata__bss_start_fbss_end 0.01a Usage: %s [OPTIONS] Informative output: -h, --help Print help information -v, --version Print version information Device configuration: -d, --device Set ppdev device Default: %s -n --no-inv Disable inversion compensation Default: Compensate for hardware inversion /dev/parports/0Output functions: -p, --print-states Print parallel port pin states in table form Exits with the decimal value of STATUS -r, --raw-reg Print raw parallel port register values in hex The registers are output in the following order: STATUS CONTROL DATA Exits with the decimal value of STATUS Input functions: -c, --set-control Sets the control register to the supplied value -s, --set-data Sets the data register to the supplied value When using the --set-xxx options, the value can be specified in hex, decimal, or octal. For example: 0xFF (hex), 255 (dec), or 0377 (oct) Keep in mind that the three least significant values of the STATUS port are almost always reported as high (0x07). The five most significant bits are the actual hardware pins. When using the --set-control option, although the CONTROL pin states are being set, they tend not to retain their setting when PPRELEASE is called (i.e., as lpif exits). ioctl(%d, PPCLAIM): %s ioctl(%d, %d, %p): %s Pin DATA Name S Pin CONTROL Name S Pin STATUS Name S --- ----------- - --- ------------ - --- ----------- - 2 DATA 0 %d 1 STROBE %d 15 ERROR %d 3 DATA 1 %d 14 AUTOFEED %d 13 SELECTED %d 4 DATA 2 %d 16 INITIALIZE %d 12 NO PAPER %d 5 DATA 3 %d 17 SELECT %d 10 ACK %d 6 DATA 4 %d 11 BUSY %d 7 DATA 5 %d 8 DATA 6 %d 9 DATA 7 %d set-controldevicehelpno-invprint-statesraw-statesset-dataversionc:d:hnrps:vset-control: Invalid value set-data: Invalid value 0x%.2X 0x%.2X 0x%.2X Setting CONTROL register to 0x%.2X Setting DATA register to 0x%.2X 0??X?X?X? ?X?X?X?X?X?L?X?T?X?`?l?X?X? ?,+@c8+@d@+@hH+@nP+@p`+@rl+@sx+@v@ @@ @ @ @ @ @@`!@@ @ @ @D@ @x @8@@l@p @\@` @P @@@ @0 @ @< @GCC: (GNU) 3.3.2GCC: (GNU) 3.3.5GCC: (GNU) 3.3.5GCC: (GNU) 3.3.5GCC: (GNU) 3.3.28@ `!@  @(< @0<@8D@0@8@8@(l@(@0@8\@8@`@`8@`!@.symtab.strtab.shstrtab.interp.reginfo.dynamic.hash.dynsym.dynstr.init.text.fini.rodata.data.rld_map.eh_frame.ctors.dtors.jcr.got.sbss.bss.comment.pdr.mdebug.abi32@#p@, @ 5@`; X@XCh@hK8@8Q@W`!@`!X]!@! e0k0t0~0000xx1|1 |1Z1 338 < ?@@ @@X@h@8@@`!@ !@    x"--4  0 @ @4*7 EQ @"ggnu  < @ @0 @@ @ @P @` @ @\@p @ l@ $@18@7 @>xG @OD@W o@w@~ @ @ @ <@x@@! `!@ @x @  @1 @6 @= @Q @V@d q x  @crt0.Sinitfini.ccrti.S/enc/home/sephail/development/asus_wl-500g/experimental/buildroot/toolchain_build_mipsel/gcc-3.3.5/gcc/crtstuff.c__CTOR_LIST____DTOR_LIST____EH_FRAME_BEGIN____JCR_LIST__p.0completed.1__do_global_dtors_auxobject.2frame_dummy__CTOR_END____DTOR_END____FRAME_END____JCR_END____do_global_ctors_auxcrtn.Slpif.clong_options.0xmallocstrcpyioctlprintfstdout_fdataxopen_gp_dispstrerror_DYNAMIC_LINKINGgetopt_long_DYNAMICparport_write_gpmallocoptargprint_help__dso_handleparport_read_initstrtolppdev_fdfprintfxstrdup__deregister_frame_info__start_ftextparport_cleanupreadrealloc__RLD_MAPxrealloc__bss_startmainparport_initdata_start_finixreadstderr_edata_GLOBAL_OFFSET_TABLE__endparport_print_state__errno_locationexitstrlen__uClibc_start_mainopenprint_version__data_start_Jv_RegisterClasses_fbss__register_frame_infoclose